High Torque Low Speed motors provide power ranging up to 15,000 inch-pounds of torque with speeds ranging from 1/2 rpm to 13,000 rpm. They deliver excellent performance with high efficiency, true wear compensation and longer service life.

 

 

  • Medium Duty Clutch Motor – Torqmotor TF Series

The TorqmotorTF Clutch Series low speed, high torque motor is ideal for applications where a freewheeling output shaft is required for some part of the duty cycle. Intermittent pressures to 4000 psi, torques to 7000 lb-in. Shaft size 1.25 inch.

 

  • Medium Duty Motor - TorqmotorTF Series

Available in flange or wheel mounts, the TF Series motor has intermittent pressure ratings to 4,000 psi, torques to 8,100 lb-in. Side load capability is 4,000 lb. on flange mounts, 6,000 lb. on wheel mounts. Shaft size 1.25 inch nominal.

 

  • Light Duty Motor - Torqmotor TJ Series

The TJ Series marries the TE Series drive train with a larger, heavier duty roller bearing and shaft. This compact, economical wheel motor has intermittent pressures to 2750 psi and torques to 5700 lb-in. The shaft is 1.25 inch nominal.

 

  • Light Duty Motor - Torqmoto TB Series

The TB Series is a durable light duty hydraulic motor with up to 1-inch shaft. It can carry side loads up to 1100 pounds with intermittent pressures to 2400 psi and torques to 4700 lb-in.

 

  • Light Duty Motor – Torqmoto TC Series

The TC Series is the most compact Torqmotor™ for lighter duty applications. Sintered copper/steel bushings for side loads up to 790 lb. With intermittent pressures to 1750 psi, torques up to 2700 lb-in can be obtained. Shaft size 1 inch nominal.

 

  • Medium Duty Motor - TorqmotorTG Series

With increased power and durability, the Parker Torqmoto TG Series low speed high torque (LSHT) hydraulic motor is available in flange or wheel mounts. Torques to 12,600 lb-in and displacements to 58.5 cu in. Shaft sizes to 1.375-inch nominal.

 

  • Heavy Duty Motor - TorqmotorTK Series

The largest Torqmotor, the TK Series is available in flange and wheel mounts. Torques to 23,500 lb-in, intermittent pressures to 4500 psi. Side loads to 7500 lb. on flange mounts, 9,400 lb. on wheel mounts. Shaft size 1.5-inch nominal.

 

 

  • Light Duty Stainless Steel Motor – Torqmotor TS Series

Designed for use underwater or in corrosive environments, all external metal surface parts of the TS Series motor are stainless steel. Side load capacity 300 lb. Intermittent pressures to 2400 psi, torques to 2000 lb-in. Shaft is 1inch diameter.

 

  • Light Duty Motor - Torqmotor TE Series

The only motor in its class with roller bearings, the TE Series can handle side loads of 1500 lb and withstand the pounding delivered by chain and sprocket couplings.

 

  • Medium Duty Motor - Torqmotor TH Series

Get higher side-load capability up to 6000 lb. on flange mounts and 5200 lb. on wheel mounts. The TH Series motor has a 1.5 inch nominal shaft size. Torques to 13,100 lb-in and intermittent pressure up to 4000 psi.

 

 

  • Light Duty Motor - Torqmotor™ - Series TE

The only motor in its class with roller bearings, the TE Series can handle side loads of 6672 N and withstand the pounding delivered by chain and sprocket couplings.

 

 

  • Medium Duty Motor - Torqmoto -  Series TF

Available in flange or wheel mounts, the TF Series motor has intermittent pressure ratings to 280 bar, torques to 920 Nm. Side load capability is 17792 N. on flange mounts, 26688 N on wheel mounts. Shaft size 31.75 mm nominal.

 

 

  • Medium Duty Motor - Torqmoto - Series TG

With increased power and durability, the TG Series motor is available in flange or wheel mounts. Torques to 1490 Nm and displacements to 960cc. Shaft sizes to 34.9 mmnominal.

 

 

  • Medium Duty Motor - Torqmotor- Series TH

Get higher side-load capability up to 35586 N on flange mounts and 33360 N on wheel mounts. The TH Series motor has a 38.1 mm nominal shaft size. Torques to 1490 Nm and intermittent pressure up to 280 bar.

 

  • Light Duty Motor - Torqmoto - Series TJ

The TJ Series marries the TE Series drive train with a larger, heavier duty roller bearing and shaft. This compact, economical wheel motor has intermittent pressures to 190 bar and torques to 648 Nm. The shaft is 31.75 mm nominal.

 

 

If you do not know how to choose a suitable replacement model, please contact us.

For more models, please contact us.

Read more!