As a small-displacement, high-speed cycloidal hydraulic motor, the OMS 80 features high rotational speed, fast response, and a lightweight design. It is ideal for equipment requiring frequent start-stop cycles and continuous light-load operation, such as street sweepers, landscaping equipment, and small-scale conveying machinery. Unlike the OMS400—a high-torque, heavy-duty model—the primary causes of wear and tear for the OMS 80 are not high-pressure overloads, but rather the temperature rise, seal wear, and speed degradation resulting from prolonged high-speed operation and frequent directional changes. Implementing maintenance specifically tailored for high-speed models can effectively prevent common issues such as slowing speed, operational stuttering, and minor oil leaks, thereby fully leveraging the equipment’s high-efficiency operational advantages.
Strictly controlling temperature rise during high-speed operation is the top priority in Motor Orbital OMS 80 maintenance. This model can reach a maximum continuous speed of 800 rpm and an intermittent speed of nearly 1,000 rpm. Prolonged high-speed operation generates significant heat; if heat dissipation is inadequate, it will accelerate hydraulic oil degradation and soften seals, leading to increased internal leakage and a drop in rotational speed. During daily operations, avoid prolonged idling or high-speed no-load operation. Regularly inspect the hydraulic radiator to ensure it is unobstructed, and promptly remove dust and debris from its surface to maintain cooling efficiency. HANJIU has optimized the seal materials and internal transmission structure of the OMS 80 for high-speed operating conditions, enhancing its resistance to high temperatures and wear. Additionally, the company provides dedicated operating guidelines to help users avoid potential damage caused by high temperatures.
Standardize high-frequency start-stop and direction-reversal operations to reduce wear on internal precision components. The Motor Orbital OMS 80 is primarily used in equipment requiring frequent forward and reverse rotation, such as sweeping brushes, conveyors, and seed dispensers. Frequent emergency stops and starts, as well as sudden direction changes, can cause impact wear on the cycloidal rotor and distribution mechanism, leading to operational vibration and response lag over time. During daily operation, ensure smooth starts, stops, and direction changes; avoid abrupt operations to prevent sudden changes in flow rate from damaging the motor’s internal structure. Leveraging mature manufacturing processes, HANJIU has optimized the OMS80’s transmission clearance, enabling smoother high-speed operation and enhanced shock resistance, making it ideal for high-frequency applications.
Precise control of hydraulic fluid viscosity and cleanliness ensures suitability for high-speed, precision applications. The OMS80’s internal precision components are designed for high-speed operation, necessitating stricter requirements for hydraulic fluid viscosity and cleanliness. If the oil temperature is too low or the viscosity is too high, high-speed operation will generate additional resistance; if dust or impurities contaminate the fluid, they can scratch precision mating surfaces, resulting in power loss. It is essential to select the appropriate hydraulic fluid based on ambient temperature, replace filter elements regularly, and inspect for fluid contamination to ensure that fluid flow and cleanliness consistently meet standards. HANJIU strictly controls the factory testing of every OMS80 unit, verifying seal integrity and operational stability under high-speed conditions to ensure the equipment’s long-term, high-efficiency performance.
Regularly inspect oil drainage and mounting tightness to prevent minor faults from accumulating. Under high-speed operating conditions, the motor vibrates at a higher frequency, and prolonged operation can lead to issues such as loose oil ports, poor oil drainage, and loose bolts. As part of routine maintenance, periodically check that the side-mounted oil ports and drain ports are unobstructed to ensure normal back pressure. At the same time, tighten the mounting flanges and connecting bolts to prevent vibration-induced uneven wear and oil leaks. Compared to heavy-duty motors, the OMS80 is simpler to maintain; simply performing routine inspections and following standard operating procedures can significantly extend its service life.
The core value of the Motor Orbital OMS80 lies in its high speed, high efficiency, flexibility, and stability, and its maintenance philosophy centers on “maintaining speed, controlling temperature rise, and ensuring stable operation.” Without the need for complex maintenance procedures, meticulous care tailored to high-speed, light-load operating conditions ensures the motor maintains ample speed and responsive performance over the long term. HANJIU specializes in optimizing cycloidal motors of various specifications for specific operating conditions. Through precise product performance and practical maintenance solutions, the Motor Orbital OMS 80 delivers continuous, stable output, enabling efficient operation of a wide range of light-duty hydraulic equipment.
omt output shaft diagram
oms orbital motor specs
motor orbital oms 400
motor orbital oms 80
sauer danfoss orbital motor data
low speed orbital motor specs
oms intermittent operation data
omt motor specifications