orbital hydraulic motor repair


Hello everyone, in the last article, we learned about the working principle of the orbital hydraulic motor and the high-quality products of Hanjiu Technology. In this article, let's take a look at the maintenance problems after purchasing the orbital hydraulic motor.


The first thing we need to know is that when you receive the purchased product, it is best not to put it into use directly. Reasonable inspection and testing can help you eliminate many problems and solve your worries.


After receiving the product, the first thing you should do is to check whether the hydraulic system components are all connected correctly and whether the product surface is damaged, and run the motor for ten minutes under no load to observe whether there is any problem in the operation of the motor. Motor oil stored for long periods of time needs to be drained and rinsed to prevent sticking of internal moving parts. During the installation process, a steel frame with sufficient strength must be used to prevent the shock and vibration of the motor during rotation. Of course, the installation bolts must be tightened evenly. Safety issues must come first. In addition, hydraulic oil has a very important influence on the service life of orbital hydraulic motor, so the selection of hydraulic oil must be careful. Specifically, according to different ambient temperatures and uses, the oil used should have good viscosity-temperature performance, Good defoaming, anti-oxidation, anti-rust, high flash point, etc. Its viscosity is between (25-70)*10-6m2/s, and the water, alkali and mechanical impurities in the oil shall not exceed the allowable value. It is recommended to use YB-N46 and YB-N68 anti-wear hydraulic oil. The system filtration precision is better than 20μm. The normal working oil temperature is 25-55℃, and the short-term working oil temperature is not higher than 65℃.


Don't be impatient if your purchase has already gone wrong. First of all, it needs to be clear that orbital hydraulic motor is a high-precision equipment product. Therefore, please do not disassemble the motor without permission. The process is likely to cause irreversible damage to the motor, and it will also cause great damage to subsequent maintenance. Trouble. If you have obtained the permission of Hanjiu, you should also pay attention during the disassembly process, do not hit the product with a hammer, and place the temporarily disassembled components separately to avoid collision between the parts and cause damage. Before assembly, all parts should be cleaned and dried to avoid interference from external impurities.


The maintenance of the damaged orbital hydraulic motor is a very troublesome thing, and the considerate after-sales service will solve a lot of troubles for you. Hanjiu Technology takes "quality first, service first" as its business philosophy, and has been committed to providing customers with the most thoughtful service. Hanjiu Technology will explain to every customer the matters that need to be paid attention to before product installation, and carefully Deal with customers' problems in the process of using products, answer customers' questions, and truly achieve one-stop service. When you buy the orbital hydraulic motor of Hanjiu Technology, what you buy is not only a high-quality product, but also a Attentive and comprehensive service.


If you want to buy related products, please visit the official website of Hanjiu Technology: www.hjhydraulic.com



hydraulic orbital motor suppliers

high speed hydraulic motors

hydraulic motor catalog

hydraulic motor parts list

hydraulic motors identifier

types of hydraulic motors

danfoss orbital motors


Read more!