Precautions for use of omp-400 hydraulic motor


Did you buy the omp-400 hydraulic motor? This is an electrically driven hydraulic motor that can be mounted on a mining excavator with a compact design with a spool valve motor and hob. Hanjiu Technology Co., Ltd. produces a large number of omp-400 hydraulic motors, specializing in the production of hydraulic products for more than ten years. Hanjiu Technology adheres to the concept of customer first, and sincerely provides each customer with the most detailed and comprehensive services. So today, let's take a look at what problems should be paid attention to during the use of omp-400 hydraulic motor, I hope these can help you use this product more conveniently and get a better product experience.


What should be paid attention to when using the omp-400 hydraulic motor hydraulic motor, and how should it be maintained?


First, the speed and pressure cannot exceed the specified values. Pressure is inversely proportional to service life, that is, the greater the pressure, the longer the service life, and the smaller the pressure, the longer the service life. For the long-term use of this product, you must pay attention to this issue.

Second, there should always be sufficient back pressure on the oil return hole of the low-speed motor. When the motor runs unstable at low speed, it can also be eliminated by applying back pressure, and the back pressure value is not less than 0.2Mpa.


Third, we should avoid sudden start or stop under load. Suddenly starting or stopping the brake under load can cause a pressure spike, and the relief valve can't react as quickly to protect the motor from damage.


Fourth, use lubricating oil with good local safety performance, and the number of lubricating oil should be suitable for its own working conditions.


Fifth, always check the fuel level of the fuel tank. This is a simple but critical preventive measure. If the leak is not found or repaired, then the system will quickly lose enough hydraulic oil, and create a vortex at the pump inlet, allowing air to suck people, and thus have a damaging effect.


Sixth, try to keep the hydraulic oil clean. Behind most hydraulic motor failures is a decline in hydraulic oil quality.


Finally, if you use the hydraulic motor as the power part of the hoisting or walking device, you must set the speed limit valve to prevent the heavy object from falling rapidly or the vehicle and other running gear from overspeed when going downhill, which may cause serious accidents. Safety is the primary condition of production, let us prevent problems together.


Hydraulic motor is a high-precision instrument product, and various problems will inevitably occur during use, but these are all small problems, because Hanjiu Technology will help you solve all your doubts. Want to learn more about hydraulic motors? Then click to enter the official website of Hanjiu Technology, where there are not only various types of hydraulic motors, but also a lot of hydraulic motor expertise. Hanjiu Technology, welcome your visit and cooperation.


Designs and principles of operation of hydraulic motors

Rexroth motor

Hydraulic system

How to choose hydraulic pump


Hydraulic cylinder

Hydraulic transmission

Gear pump


Read more!