The hydraulic orbital motor is an actuator of the hydraulic system, a hydraulic device that drives the rotation of the equipment components, in other words he is equivalent to the human hand, is responsible for the execution of the human body system commands of the executive element. Many people do not understand hydraulic orbital motor, in fact, for the majority of users, if you understand the internal structure of the motor that is very good, but for beginners, we only need to understand the hydraulic orbital motor to transport bricks and turn with enough.
1.hydraulic orbital motor structure and performance characteristics
① Adopting end-face flow distribution and axial flow distribution, simple and compact structure, high precision of flow distribution.
②The stator-rotor pair with set teeth has high mechanical efficiency and long life of high pressure operation.
③Adopting double angular joint ball bearings, it can withstand large radial and axial loads, low friction and high mechanical efficiency.
④Excellent design of flow distribution mechanism, featuring high precision of flow distribution and automatic compensation of wear.
⑤hydraulic orbital motor is allowed to be used in series and parallel, and should be connected with external oil drain port when used in series.
⑥hydraulic orbital motor can be used in series and parallel, and should be connected with drain port when used in series.
⑦ A variety of flange, output shaft, oil port and other mounting connection forms.
2. Precautions for hydraulic orbital motor operation
①Check whether all components of the hydraulic system are connected correctly and add oil to the specified height through the filter before operation.
② In the unloaded state start running for 10 ~ 15 minutes, and exhaust, foam in the tank, the system has noise, and the motor cylinder has a stagnation in the system proves that there is air.
③Excluding the air, fill the oil tank, and then start to hydraulic orbital motor gradually increase the load until the specific load, observe whether there are abnormal phenomena, such as noise, oil rise and oil leakage.
④Change the oil once by running for 50 hours, and change it later according to the maintenance rules.
⑤ Do not disassemble easily if the motor is not faulty.
3. Disassembly and assembly of hydraulic orbital motor
①Disassembly and assembly should not touch the bonding surface, if touch, need to be repaired before assembly.
②Wash all parts with gasoline or kerosene before assembly, do not use cotton yarn or rags to scrub the parts, use a brush or silk cloth, do not dip the rubber ring in gasoline. After the motor is loaded, before loading the machine, you need to add 50~100 ml of hydraulic oil to the two oil ports, rotate the output oil, such as no anomalies before loading the machine.
③ In order to make the hydraulic orbital motor rotate in the right direction, you need to pay attention to the positional relationship between the rotor and the output shaft.
④The rear cover bolts should be tightened diagonally and gradually, and the tightening torque is 4~5kg force-meter.
The above is about the basic use of hydraulic orbital motor, if you still want to know more about the product, you can continue to pay attention to our official website or directly online to get in touch with our staff, thank you for your reading and support.
hydraulic orbital motor diagram
hydraulic orbital motor function
danfoss hydraulic motor identification
danfoss oms motor catalog
hyvair hydraulic motor specifications
danfoss oms 100 hydraulic motor
danfoss oms 80 hydraulic motor
hyvair hydraulic motor specs